Window Repairs

Window repairs can help homeowners save money and keep their homes comfortable. In the event of severe damages such as broken glass or a shattered frame, a replacement window may be required.

Many other issues can be solved to prolong the lifespan of windows. The most frequent issues are:

Cracked or broken Panes

If it's an unintentional rock that was tossed by your lawnmowers or a tree branch blown by strong winds, cracked window glass is not only unattractive but can lead to higher electric bills since the broken pieces let cold air into your home. It's relatively easy to repair windows with damaged panes.

Start by carefully removing glass with gloves and safety sunglasses. You may need to use a utility knife to break loose any remaining putty or window repairs old glazing compound that has accumulated around the edges of the frame. Then, use a soft cloth or paper towel to wipe the surface of the glass and the wood of the frame.

After the area is cleaned, apply a waterproof silicone caulking to the frame's perimeter. This will stop water from entering through the crack, which can cause further damage to both the frame and the glass.

A serious crack in double glazing repairs near me-paned glass could cause gas to leak between the panes, which can make your windows less insulative. If the crack is severe enough to threaten the quality of the glass or if you have an inner pane that's completely missing, it might be the time to call an expert.

Cracks in thermal stress can occur when there's an extreme difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If this happens on two portions of a window it's recommended to replace the glass instead of trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It can also keep out cold winds and bugs. You can even cut an area of nylon stocking or tarp sufficient to cover the crack, and stick it to the wall using duct tape. This is not an indefinite solution, but it can keep cold air out and insects away from your home. If your windows are older and you're starting to notice cracks in the glass, it's an excellent idea to talk with your local window manufacturer about whether replacing the entire window might be a better solution for you.

Rotten Wood

Wood rot is a common problem for windows. It can ruin the appearance of a home and it can also pose a safety risk. However, it is possible to fix rotted wood. First, you will need to ensure that the cause of the rot has been addressed. Check for roof leaks and other areas where water can enter the wood.

The next step is to get rid of any rotten areas of the window frame. This can be done with a rasp, chisel or claw hammer. After the areas that are rotten have been removed then you must replace them with fresh wood. It is recommended to make use of pre-treated wood for this project since it will be resistant to decay. If you are unable to replace the wood that has been damaged then you can use wood hardener or filler to repair the damaged area. Most hardware stores will carry this type of product. To achieve the best results, make sure you follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. This can be done by applying a water-resistant wood sealant. A product like Sikkens is a great choice for this task.

It is also possible to use a two-part epoxy filler to protect the wood from further damage. This product is easy to apply and leaves a nice finish. However, it's important that you follow the directions for application on the label. Once the epoxy filler is dry, you can sand window repairs the wood's surface. It is best to begin with a rough piece of sandpaper before moving to a smoother grade.

You don't want to expose the damaged area to more moisture. It is recommended, that's why you should cover the repaired surface with an oil-based primer that will protect it from water. After that, you are able to apply the waterproof wood sealant.

The W won't let you open

There are many reasons windows won't open. The house could have settled, or the wood frames may have warped in wet weather. Someone might have also put them in place to protect themselves. However, with a bit of patience and the right tools, all windows that are stuck can be opened.

One of the main causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Dirt and grime build up on sliding tracks, hinges and locks over time, says Acme Glass. Metal hardware may also rust if it comes into contact humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and help keep your windows operating properly.

Stuck windows can also be the result of a loosening or breakage of the pulleys that are used to lift and lower the window. These components can lose their tension and cause obstruction, especially if the window is located two or more stories above the ground.

If you have trouble opening a door, try using a pry-bar to gently push the window open. Place a block of wood on the frame to give the pry bar more leverage, and be careful not to scratch the window or the wood. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

Another common issue with windows that won't open is a defective spring that stops the window jamb from rising or lowering. Based on the manufacturer of the windows, you'll need to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and lubricating them, but they're still unable to open it could be the right time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows of your home become functional to useless. If your windows aren't properly shut can expose your home to burglary and water damages. Contact our team for more information on our windows replacement services and products today!