Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They do not decay or rust as aluminum and timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers that help the new pane to fit properly into the frame of the window.

If you plan to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor and could be trampled under.

It's a good idea to seal the gap after the glass is removed. This will stop drafts and water from entering your property until a professional comes out to fix the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is large, you may want to consider using the security door with an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. As time passes, they may be affected by a variety of issues that include sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window to get to the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to hold them in place.

If you are unable to reposition the hinges, Window Repairs you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen. This is typically caused by screws that have loosened over time, but it can be due to the mechanism of the handle wears out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and do an initial fitting. The corners of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it's important to take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or not present.

This is a relatively easy fix and should be undertaken by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It is very easy to change a window hinge however it is easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the correct direction. This can be done by checking for the arrows on each hinge. This shows which way the window should open.

The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to provide advice.

It is also important to grease the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This should be done at least every year. WD40 or other solvent-based lubricants should not be used as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges may also become disaligned as a result of wear, creating a gap where the sash and frame meet. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to get them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window repair near me and can be misaligned. Again, it's possible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The seals may wear out or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be put on top of your window sill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.