Window Repairs

Window repairs can help homeowners save money and help keep their homes warm. In the event of serious damage, such as broken glass or a damaged frame, window replacement may be required.

Many other issues are fixable to extend the life of windows. Some common issues include:

Cracked or broken Panes

Whether it's an errant rock thrown by your lawnmower or a tree branch blown by high winds, damaged window glass is not only unattractive but can lead to higher electric bills since the broken pieces let cold air into your home. Fortunately, it's generally easy to repair windows that have cracked panes.

Start by carefully removing glass with gloves and safety sunglasses. You may have to use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood using a soft cloth or paper towel.

Once the frame is clean and dry, apply a waterproof silicone caulking on the perimeter of the frame. This will prevent water from getting into the frame through the cracks and causing further damage.

A serious crack in double-paned glass could cause gas to leak between the panes, which can make your windows less efficient in insulating. If the crack is so severe that it threatens the integrity of the window or if the inner pane is missing it is possible to contact a professional.

Cracks in thermal stress can occur when there's an extreme difference in temperatures between the inside and outside of your home, which causes the glass to expand or double glazing repairs near me contract. If the cracks are situated on two sides of a window it is recommended to replace it rather than try to repair it.

Clear tape can be used to seal cracks in windows that aren't yet ready for replacement. It can also keep out bugs and cold wind. You can cut a nylon stocking large enough to completely cover the crack and glue it with duct tape. This isn't a permanent solution however it's a great solution in a pinch and it keeps cold air and insects out of your home. If your windows are older and you're beginning to notice cracks in the glass It's a good idea to check with the local window company to determine if replacing the entire window could be the best solution for you.

Rotten Wood

Wood rot is a common problem for windows. It can ruin the appearance of a home and it can also pose an hazard to safety. It is, however, possible to repair rotted wood. The first step is to ensure that the root of the rot has been dealt with. Examine for leaks in the roof and other areas where water could get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done using an axe, a claw hammer or a rasp. After removing the rotten wood, you'll need to replace it with new wood. Pre-treated wood is recommended for this project since it is resistant to rot. If you are unable to replace the timber that has rotted you can apply wood hardener and filler to repair the damaged area. This kind of product will be available at a majority of hardware stores. To get the best results, adhere to the instructions on the label.

Once you have replaced the rotten areas of the windowsill, it's essential to protect the newly-repaired area. This can be done by applying a water-resistant wood sealant. A product like Sikkens is a good choice to accomplish this task.

Make use of a two-part epoxy to protect the wood against further damage. This product is easy-to-apply and leaves a beautiful finish. However, it's important that you adhere to the instructions for application on the label. Once the epoxy filler is dry, you can rub the surface of the wood. Start with a rough sandpaper, then move on to more smoother grades.

You do not want to expose the damaged area to more moisture. It is a good idea, so, to cover the repaired surface with an oil-based prime which will shield it from moisture. After that, you can apply waterproof wood sealant.

The W won't let you open

A window repair near me that isn't opening can be the result of various reasons. Wood frames can warp when exposed to wet weather, the house might have sunk or someone might have closed it for security reasons. With a bit of patience and the right tools you can unlock most stuck windows.

One of the most frequent causes of windows that isn't able to open is the accumulation of debris or gunk on its moving parts. Dirt and grime build up on the sliding tracks, hinges and locks over time, according to Acme Glass. Additionally, hardware made of metal can rust when it comes into contact with humidity and direct sunlight. Spraying grease on these areas to aid in preventing oxidation and springmall.net ensure that your windows are operating correctly.

The pulleys that raise or lower the window may become loose, or even break. These parts can lose their tension and become obstructed, especially when the window is two or more stories higher than the ground.

If you are having difficulty opening a door, you can use a pry-bar to gently push the window open. Put a piece of wood on the frame to give the pry bar more leverage. Also, be careful not to scratch the window or the wood. Alternatively, try running a hair dryer along the edges of the frame for several minutes to warm the wood and allow it move more easily.

A damaged spring can be the reason for windows that don't raise or lower. You'll need to refer to your owner's guide for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, RepairMyWindowsAndDoors but they still cannot open, it's probably time to replace the windows. Homespire Windows & Doors provides energy-efficient replacement windows. Don't let your windows go from functional to unusable, as windows that aren't properly closed can make your home vulnerable to burglary and water damage. Contact us today for more information about our replacement windows and services!