Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and even be fatal. It is crucial to take the time to make sure that you are doing everything you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double glazing repairs Burnham-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this instance you'll need to find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier, deterring any intruders to gain access into your home. If the gap is large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts or even security. It is crucial to act when you notice your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close your window repair Ashford and verify the fit. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash must align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into its original position.

3. Water Leaks

If you're waking up to damp floors and Window repair Sale mouldy walls every time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking used previously may require removal before a fresh layer can be applied. When it comes to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC Window Repair Sale is difficult to open, or if it blows open with a breeze. These are easily repaired by any DIYer who is skilled and are usually done within a few minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. Sending us a photo through our website can often solve the issue. We are always happy to offer assistance.

Regular lubrication of the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. Firstly the hinges, again due to wear and tear can become misaligned, this will cause gaps to develop between the sash and the frame. If they are beyond repair, it might be necessary to have them realigned. In addition, the interlock could be unbalanced. It is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace these.

The next most common reason for draughts is window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach a point where it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult an expert as soon as possible.