Repairs to uPVC Windows

upvc window repairs is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and even be fatal. You should take the time to ensure that your windows are in good working order.

Single-pane windows are fairly simple to replace and typically fit into frames that were previously in use very easily. However If you have double glazing-pane windows that are held in place by internal beading, it will be more difficult to remove the existing panes and install new ones. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also an excellent idea to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will prevent drafts and water from getting into your home until a professional is able to fix the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the door and the window is significant, you may want to use security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can get at the frame. With the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in place.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to lose their tightness. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. You'll first need to close the window and then perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into its original position.

3. Water Leaks

It is essential to act if you awake each day to discover mouldy walls and wet floors. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature inside your home. Most often, upvc window repairs uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, upvc window repairs old caulking may need to be removed. It is important to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it blows open with a breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a simple process, but it's simpler with someone else to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. This can be done by checking for the arrows on each hinge. This shows which way the window should be opened.

The problem can be caused due to opening the window in the wrong way or by a poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you advice.

It is also essential to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the chance of windows sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. First, the hinges because of wear and tear, could become misaligned. This will cause gaps to develop where the sash meets the frame. This can be easily fixed by giving them a thorough clean, however in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it is possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. Installing high-quality weatherstripping can help stop draughts. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be put on top of your window sill. They can help block out cold air and keep your home warm and cozy!

The windows made of upvc can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as possible.