Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards will fall onto the cloth instead of onto the floor where they could be trodden under and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional can come out and fix the window repair Kentish Town. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the distance between the window and the door is substantial, you may prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act immediately if you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you've moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. The majority of the time, window repairs Kettering this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need close the window and then perform an initial test fit. The joint at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is important to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on how serious the problem is, the old caulking may have to be removed. When it is time to uPVC repair, you must avoid over-caulking. This will make your window more difficult to clean and lower its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the Window repairs Woking.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and blow open in a breeze it could be hinges at fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a Window Repairs Kettering, but it's easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a photograph on our website. We will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, creating an opening where the sash meets frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them aligned or replaced. Secondly the interlock, this is on the hinge side of the window, can also become misaligned, again it is possible to give them a clean but in certain cases, it may be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be placed over your window sill. They will keep your home warm by blocking cold air.

With a little maintenance and repairs windows made of upvc will continue to provide excellent insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult an expert as soon as possible.