Window Repairs

Window repairs can help homeowners save money and ensure their comfort. Window replacements may be required in the event of severe damage such as broken glass, or a window frame that has been smashed.

Many other issues can be solved to prolong the life of windows. Common problems include:

Cracked or Broken Panes

Cracked window glass could be caused by a lawnmowers that throws errant rocks or by branches of trees being blown by strong winds. This not only looks terrible, but it could result in higher energy bills because the broken pieces let cold air in to your home. Fortunately, it's generally simple to repair windows with cracked panes.

Begin by carefully removing the glass using gloves and glasses. You may have to employ a utility knife to remove any remaining putty or old glazing compound around the edges of the frame. Next, use a soft cloth or paper towel to clean the glass's surface and the frame's wood.

After the area is cleaned, apply a waterproof silicone caulking to the perimeter of the frame. This will prevent water from getting into the frame through the crack and result in further damage.

A bad crack in double-paned glass can compromise the gas between the panes, which can make your windows less insulative. If the crack is serious enough to compromise the quality of the glass or if you have an inner pane completely missing, it might be time to contact an expert.

Thermal stress cracks may also occur when there is a drastic difference in temperature between your home and the outside. This causes the glass to expand and contract. If this happens on two parts of a window it's recommended to replace the glass rather than trying to repair it.

If your windows are cracked and repairmywindowsanddoors not quite ready to be replaced, clear tape can do a great job of preventing the crack from spreading and keeping out bugs and cold air. You can also cut an area of nylon stocking or tarp that's large enough to cover the crack, and glue it in place with duct tape. This isn't a permanent solution, but it works well in the event of a crisis and keeps cold air and insects out of your home. If you notice cracks or blemishes on your older windows it is recommended to contact your local company to see if replacing the whole window is the best option.

Rotten Wood

Wood rot is among the most common problems with windows. It can ruin the appearance of a house and also pose an hazard to safety. It is, however, possible to repair wood that has rot. First, you must address the cause of the wood's rot. Examine for leaks in the roof and other areas where water can enter the wood.

The next step is to get rid of any rotten areas of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After the rotten areas have been cleared it is time to replace them with new wood. It is recommended that you use pre-treated wood for this project since it will be resistant to rot. If you are not able to replace the timber that has rotted you can apply wood hardener and filler to strengthen the damaged area. Many hardware stores will have this type of product. Follow the directions on the label of the product to ensure the most effective results.

After you have repaired the damaged areas of the window sill, it's important that you protect the area. This can be done by applying an water-resistant wood sealant. A product like Sikkens is a great choice for this job.

You can also apply an epoxy filler with two parts to shield the wood from further damage. It is easy to apply and provides an excellent finish. It is crucial to follow the instructions on the label. Once the epoxy filler has dried, you can sand the wood's surface. It is best to begin with a rough grade of sandpaper before moving to a smoother one.

You don't want to expose the rotted part to more moisture. It is a good idea, so, to cover the surface repaired with an oil-based primer which will shield it from moisture. Then, you can apply waterproof wood sealant.

The W won't open

A window repairs Huntingdon that isn't opening could be due to a variety of factors. The house could have settled, or repairmywindowsanddoors the wood frames could have warped during rainy weather. Someone might have also secured them with a nail for security. However, with a bit of patience and the right tools, all windows that are stuck can be opened.

One of the most common reasons for windows that isn't opening is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime accumulates over time on sliding tracks, hinges and locks. Metal hardware may also rust if it comes into contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent oxidation and keep your window working properly.

Stuck windows could also be the result of a loosening or breakage of the pulleys used to raise and lower the window. These parts can lose their tension and cause obstruction, especially if the window is located at least two stories above the ground.

If you have trouble opening a door, try using a pry-bar to gently push the window open. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. You can also try running a hair dryer across the edges of the frame for several minutes to warm the wood and assist it move more easily.

Another issue with windows that don't open is a defective spring that keeps the window jamb from rising or lowering. Depending on who manufactured your windows, you'll be required to refer to your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving components on your windows, but they won’t open, then it may be time to replace them. Homespire Windows & Doors provides windows that are energy efficient. Don't let your windows slip from functional to unusable because windows that aren't properly closed can make your home vulnerable to water damage and burglary. Contact our team today for more information on our replacement windows and our services!