Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. However when you have double pane windows that are anchored by internal beading it will be more difficult to take out the old panes and put in new ones. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. This also serves as an obstruction to prevent intruders from making their way into your home. If the gap is large, you may think about an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A sagging uPVC windows can cause problems with light, draughts and upvc repair even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need to open the window so that you can access the frame. Then, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows remain watertight and draught-proof.

uPVC handles may also become loose. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to Repair My Windows And Doors a loose uPVC handle. First, you'll need to close the window and do a test fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any competent DIYer. Depending on the severity of the problem is, the old caulking may have to be removed. When it is time to uPVC repair, you should avoid over-caulking. This can make your window harder to clean and reduce its energy efficiency.

Check that any drainage holes have no debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens in a breeze. These are easily replaced by any competent DIYer and are usually completed in just a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

It is also important to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and help prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form where the sash meets the frame. This can be easily fixed by giving them a good clean, but if they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could also become misaligned. This is located on the hinge's side and could require to be cleaned. In some instances it is possible to replace them.

The next common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will help to block out cold air and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.