Window Repairs

Window repairs can help homeowners save money while maintaining their comfort. Window replacements may be required in the event of serious damage like broken glass or a broken window repair frame.

Other issues can be solved to prolong the life of windows. Some common issues include:

Cracked or Broken Panes

It's a rock that's been being tossed by your lawnmowers, or a tree's branch blown by strong winds, cracked window glass isn't just visually unappealing, but also can result in higher electric bills since the broken pieces allow cold air to enter your home. Luckily, it's usually relatively easy to repair windows that have broken panes.

Start by carefully removing the glass using gloves and glasses. You may have to use an utility knife to break loose the old glazing compound or putty around the frame's edges. Then, use a gentle cloth or paper towel to wipe the surface of both the glass and the wood of the frame.

After cleaning the area, apply silicone caulking that is waterproof around the frame's perimeter. This will prevent water from getting into the frame through the crack and result in further damage.

A crack that is severe in double-paned glass can cause gas to leak between the panes, rendering your windows less insulative. If the crack is serious enough to compromise the integrity of the glass or in the case of an inner pane that's completely missing, it's time to call in an expert.

Cracks in the glass caused by thermal stress may occur when there is a drastic difference in temperature both inside and outside your home. This causes the glass to expand and shrink. If the cracks are located on two sides of a glass, it is best to replace it rather than try to repair it.

For cracked windows that aren't quite ready to be replaced Clear tape can do a good job of preventing the crack from spreading and preventing bugs from entering cold air. You can even cut a piece of nylon stocking or tarp that's sufficient to cover the crack and stick it to the wall using duct tape. This isn't a permanent solution, but it can keep insects out and cold air away from your home. If you notice cracks on the windows of your old ones You should consult the local company to determine if replacing the whole window is the best option.

Rotten Wood

Wood rot is one of the most common problems with windows. It can ruin a house's appearance and create a security danger. However, it is possible to fix rotted wood. First, you must determine the root of the wood decay. Look for leaks on the roof and other places where water could get into the wood.

The next step is to take out the rotten components of the window frame. This can be done using a claw hammer, chisel, or rasp. After the areas that are rotten have been eliminated then you must replace them with fresh wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you are not able to replace the wood that has been damaged You can try using wood hardener or filler to help strengthen the damaged area. This type of product will be available at most hardware stores. To get the best results, make sure you follow the instructions on the label.

After you have replaced the rotten areas of the windowsill, it is crucial to safeguard the newly repaired area. You can do this by applying an water-resistant wood sealant. Sikkens for instance, is a great product to apply.

It is also possible to use an epoxy filler with two parts to shield the wood from further damage. It is simple to apply and gives an excellent finish. It is important to follow the directions on the label. Once the epoxy filler has dried, you are able to rub the surface of the wood. Start with a rough sandpaper and then move on to an easier grade.

The most important thing you don't want to do is to make the area that has been damaged by exposed to more water. So, it's a good idea to cover the area that has been repaired with an oil-based primer which will shield it from moisture. Then, window repairs you can apply waterproof wood sealant.

Won't Open

The reason a window won't open could be due to many reasons. The house may have settled or the wooden frames may have warped in rainy weather. Someone might have also secured them with a nail for security. But with some patience and the right tools, all windows that are locked can be opened.

One of the most frequent reasons for windows that isn't opening is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Additionally, hardware made of metal can be rusty when it comes in contact with humidity or direct sunlight. Spray grease on these areas can aid in preventing oxidation and keep your windows functioning correctly.

Stuck windows could be the result of the breaking or loosening of the pulleys that are used to lift and lower the window. These components can lose tension and become obstructed if they are located at least two floors above ground.

If you're having trouble opening windows Try using a pry bar to gently force the window to open just a little at a time. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. You can also try running a hair dryer across the edges of the frame for a few minutes to warm the wood and assist it move more easily.

Another common problem with windows that won't open is a broken spring that prevents the window jamb from rising or lowering. You'll need to check your owner's guide for more details based on the manufacturer of your windows.

If you've tried cleaning the moving parts of your windows and lubricating them but they still won't open It could be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let your windows slip from functional to useless because a window that isn't properly closed can expose your home to water damage and burglary. Contact us for more information on our windows replacement services and products today!