Window Repairs

Window repairs can help homeowners save money and maintain their comfort. Window replacement is often required in the event of severe damage such as broken glass, or a window frame that has been smashed.

Other issues can be fixed to extend the lifespan of windows. Some common problems include:

Cracked or broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch blown by high winds, cracked window glass is not only visually unappealing, but also can result in more expensive electricity bills because the broken pieces allow cold air into your home. It's fairly simple to repair windows that have broken panes.

Begin by carefully removing the glass with gloves and safety sunglasses. You may need to make use of a utility knife in order to remove any remaining putty or glazing compound around the edges of the frame. Next, wipe down the glass's surface and the wood of the frame with a soft cloth or paper towel.

After cleaning the area, apply a silicone caulking that is water-proof around the frame's perimeter. This will prevent water from leaking into the frame through the cracks and causing further damage.

A crack that is severe in double glazing repair St Neots-paned glass may compromise the gas between the panes, rendering your windows less efficient in insulating. If the crack is significant enough to cause damage to the integrity of the glass or the glass has an inner pane that's completely missing, it's time to contact a professional.

Cracks in thermal stress can happen when there's a dramatic difference in temperature between the inside and outside of your home, which causes the glass to expand or contract. If this happens to two parts of a window it's recommended to replace the window instead of attempting to repair it.

For cracked windows that aren't quite ready to be replaced clear tape can do a good job of securing the crack and preventing the entry of bugs and cold air. You can also cut a piece of nylon stocking or tarp that's sufficient to cover the crack and stick it to the wall using duct tape. It's not an indefinite fix, but it will keep insects out and cold air away from your home. If your windows are older and you're beginning to notice cracks in the glass, it's a good idea to check with the local window company regarding whether replacing the entire window would be a better option for you.

Rotten Wood

Wood rot is among the most frequent issues with windows. It can ruin a house's appearance and create a safety risk. However, it is possible to repair wood that has rot. First, you must address the cause of the wood rot. Check for roof leaks and other areas where water could get into the wood.

The next step is to remove the rotten parts of the window frame. This can be accomplished with either a chisel, a rasp or claw hammer. Once the rotten areas have been removed it is time to replace them with new wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you are not able to replace the wood that has been damaged, you can try using wood filler or hardener to help strengthen the damaged area. This type of product will be available at a majority of hardware stores. To achieve the best results, adhere to the directions on the label.

After you have replaced the decayed areas of the windowsill, it is important to protect the repaired area. Apply a water-resistant sealant on the wood. A product like Sikkens is a good choice for this task.

It is also possible to use a two-part epoxy filler to protect the wood from further damage. It is easy to apply and leaves a nice finish. However, it is very important that you follow the directions for application on the label. After the epoxy filler is dry, you can rub the wood's surface. Start with a rough sandpaper, and then move on to an easier grade.

You don't want to expose your damaged area to more moisture. It is therefore recommended to cover the repaired area with an oil-based primer that will help protect it from moisture. After that, you are able to apply the waterproof wood sealant.

It won't open

There are many reasons windows won't open. Wood frames can warp when exposed to humid weather, the house might have sunk or someone might have nailed it shut to protect themselves. However, with a bit of patience and the right tools, all windows that are stuck can be opened.

One of the main causes of windows that isn't opening is the accumulation of gunk or debris on its moving parts. Acme Glass notes that dirt and grime build up over time on the sliding tracks, hinges, and locks. In addition, metal hardware may rust when it comes into contact with humidity or en.easypanme.com direct sunlight. Spraying grease on these areas can help prevent oxidation, and double Glazing wembley help keep your windows operating well.

Stuck windows may be caused by an unintentional break or loosening of the pulleys that are used to raise and lower the window. These parts can be weakened and obstructed if they are located two or more floors above surface.

If you have difficulty opening a door, use a pry-bar to gently open the door. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Alternately, you can run a hair dryer along the edges of the frame for several minutes to warm the wood and allow it to move more easily.

Another issue with windows that don't open is a defective spring that stops the window jamb from rising or lowering. You will need to consult the owner's manual for more details depending on the person who made your windows.

If you've tried cleaning and lubricating the moving parts of your windows, but they cannot open, it's time to replace windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows of your home go from functional to unusable. If your windows aren't properly closed could expose your home to water damage and burglary. Contact our team today for more information on our replacement windows and our services!