Double Glazed Window Repair

Double glazing is an energy efficient investment that stops loss of heat during winter and helps to keep your home cooler during the summer. Restoring your double-glazed windows as needed is a great way to keep them in good condition.

Over time, your double glazed windows can suffer from issues like condensation and misting. This can cause your double glazing repair Rochdale-glazed windows to be difficult to open or shut.

Broken Panes

A rogue ball or a flying stone from your lawnmowers or a storm that is strong enough can break the double pane windows of your home, leaving you home vulnerable to the elements. Even though a glass window that has been damaged isn't easy to fix, it doesn't need to be replaced. In fact the insulated glass that is between the two panes remains in good shape and you can fix your double-pane window with a bit of DIY effort.

You'll first need to remove any broken glass from the frame. You'll need to be careful to keep glass shards from falling onto the floor or sliding off the frame. Use work gloves to protect your hands, and place a rag around the broken glass to avoid further cuts or damage. After removing the broken piece, carefully clean the entire frame of the window to remove any sealant residue and debris. It is important to sand rough areas of the frame to create a smooth surface for the new glazing.

After cleaning the frame, you can apply a new layer of glass to the place where the broken pane was removed. This is the most effective method to protect and seal your window. It can also reduce your energy bills by preventing drafts and water from entering the home. Next, you will need to choose your glazing material. There are a variety of options, including clear tape that is more durable than regular tape, and can prevent further cracking of your window or Double glazing Southgate glazing film which is similar to clear plastic wrapping. The advantage of this choice is that it can be painted over to match the frame you have and will also keep out rain and snow as well.

No matter what material you use it's essential to press the glaziers points into that gap where the putty meets your frame. These will hold the newly-formed glass in place and assist it to adhere to the frame. Hardware stores sell glazier's point ropes that you can roll out on the frame rabbets.

Condensation

If you are experiencing issues with condensation, it is recommended to contact the window manufacturer. Many companies offer warranties and guarantees that cover the issues. Fogging or condensation between the windows' panes is a sign that your seals are broken. Only an expert can fix this problem by replacing both panes.

This procedure is a bit tricky and requires the use of special tools to remove the old pane and then install the new one, but it can be done by an expert who will supply the required equipment. Using these tools can be dangerous, however it is best to leave this type of work to an expert.

Wear safety gloves and glasses if opt to do it yourself. You may be exposed to glass fragments flying around. It is important to take out all putty or metal glazing points from the grooves that will be receiving the new window. It is also recommended to brush the frame with wire, and then vacuum or wipe it with a damp cloth. After the frame is dry, you'll need to order a replacement piece of glass that is 1/8" shorter in both directions than your existing window. Test-fit the glass into the grooves.

You'll require a layer of silicone caulk into the grooves of frames to ensure your new glass is secure in its installation. After the caulk dries it is time to smooth it and make any needed adjustments. The wood molding will then be put back in place.

If the weather suddenly changes, double-glazed windows may be difficult to open and close. Extreme temperatures can cause frames of double-glazed windows to expand or contract, causing them to become sagging and stick. Try wiping the frames with water and lubricating them when this happens, but it may be better to seek advice from the company who installed your windows.

Misunderstood

If moisture is trapped between the glass panes it can cause misty double glazing. Double glazing consists of two glass panes which are separated by an insulating space, typically filled with argon gas to provide improved thermal efficiency. This creates an airtight seal that keeps warm room air inside and cold outdoor air outside which allows you to keep your temperature comfortable in your home.

The seal could fail over time, and moisture can build up between the glass panes which can cause them to turn to appear misty. This happens because the space between the panes is heated by the sun, which causes water vapour to develop within it.

This is a natural process however if it occurs between the panes of the window it can be a problem since it will no longer be able to control the temperature in the room. Instead, the temperature outside the window will influence the temperature inside. If you notice that your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single blow sealed unit, without the need to replace the entire window. This is far more streamlined than a total replacement. Our misty glass repair consists of removing and cleaning the glass unit and replacing it with a brand new one. This creates a watertight seal again.

There are some companies in the field who claim to drill holes into your windows with mist and inject chemicals into them, which they claim will eliminate the fog & condensation, however, we do not recommend this procedure. This method is not only unattractive, but it could also damage the toughened glass and can result in windows that don't completely function.

If you don't fix the problem immediately it could cause mould, which can not only damage the window, but could also risk health issues for your loved ones. Moisture can also cause issues within your home, including dampness or rot. In some instances windows, they may have to be completely replaced.

Failed or Blown

Double-glazed windows consist of two panes of glass with an air or inert between them. This increases their thermal efficiency by keeping heat in and the cold out. As time passes, the gas can become depressurised and cause various problems.

Condensation between panes is one of the most common. While it is a natural event, it doesn't necessarily mean that your window has failed but it could be an indication that you have to seal your windows. Condensation could also be an indication of a damaged double glazing, which will need to be replaced.

Double Glazing Southgate-glazed windows can also create draughts. This could be caused by an issue with the seal or a damaged handle or lock. A draught can be quite evident and can result in higher heating bills, so it is important that you get this fixed sooner rather than later. You can test the seals by feeling around the edges of your window frame to determine whether you feel cold air.

You may also see water beads on the inside of windows if the window seals aren't performing as they should. This is an indication that you have to seal your double-glazed windows.

Your window frames are designed to move a little bit in order to do in order to keep the glass sheets in the right place. In time, this special packaging material could become compacted. This could cause the seal to become broken. This allows air to circulate between the panes and reduce the efficiency of your window.

Double glazing that has ruptured seals is an indication of a failure and needs to be repaired immediately. A damaged seal will stop your double glazing from fulfilling its primary job of keeping the cold out and warm in. A blown seal can also let moisture into your home, which can lead to mold and other unpleasant conditions. You should call a specialist in double glazing repair immediately if you discover a blowing seal on your double-glazed windows, as they can replace the whole unit.