Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and Repairs to uPVC Windows easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.

It is crucial to wash and oil UPVC doors and windows regularly. This will save you from costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it can be relatively simple to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional comes out and repair the window. This will also provide an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you may want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. However, over time they can suffer from a variety of issues like sliding. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you're satisfied with the size of the window, you can tighten screws to secure them in place.

If you aren't able to move the hinges you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is typically caused by screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close your window and do an initial test fit. The corner joints of the sash need to be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is crucial to take action if you awake each day to find a smoky wall and floors that are wet. The leaks of water from windows do are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on the severity of the problem is, the old caulking might need to be removed. When it is time to uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and lower its energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is with the seal rather than the frame. Again this can easily be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repairs windows are difficult to open, or loose and open with a breeze it could be hinges that are at fault. They can be repaired by any DIYer who is skilled and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It is an easy procedure, but it is simpler with someone else to help you hold the frame in place.

Verify that the uPVC hinges are closed and open in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by poor installation at the factory. This can often be resolved by sending us a photo via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window operate and close more easily. It also decreases the risk of a window sticking and help prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges, also due to wear and tear can become misaligned, this will cause an opening to appear between the sash and the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to have them realigned or replaced. The second is the interlock, which is located on the hinge of the window, may also be misaligned, and again it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are typically fabric tubes filled with a filler, which can be hung over your window sill. They will keep your home warm by blocking cold air.

The windows made of upvc can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.