Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They do not get rotten or rusty like timber and aluminum.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the frames that were previously in use very easily. If you have double Glazing repair stockport-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window repair Hillingdon frame.

Wearing eye protection and thick gloves is a must when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the fabric instead of landing on the floor where they can be trampled on and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the door and the window is substantial, you may want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from worsening.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll need open the window so that you can get to the frame. Then, you can remove the hinges on the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you are unable to reposition the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to lose tightness. It is important to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. Most often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has been worn out. Fortunately, it's easy to repair the loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to take action if get up each morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may have to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the problem is with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open in a breeze it could be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It's easy to replace a hinge on a window however it is simpler if you have someone to help hold the frame.

Make sure that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem with the hinges on windows could be caused by improperly opening the window a certain way or double glazing Repair Stockport due to inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be happy to give you advice.

It is also important to lubricate the hinges on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. First, the hinges due to wear and tear can become misaligned, this causes an opening to appear between the sash and the frame. If they are damaged beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window and can also be misaligned, and again it is feasible to give them a clean but in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals. These can become worn down or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide excellent insulation and security for your home. It is essential to remember that all windows will eventually wear out and it is more cost-effective to simply replace them than to repair them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance immediately.