Choosing uPVC Replacement Window Handles

Almost all customers agree that the upvc replacement window handles are simple to install and feel like high-quality. It's crucial to understand that the handle you select for your window has to be suitable.

The height of the step is the most important aspect. It is the distance between the handle and the base or frame. Other considerations include lockable styles and mechanisms.

Replacement parts

You can buy a variety of replacement upvc handles. They are available in a variety of styles and colors so there is sure to be something that will fit your existing windows. It's easy to buy something on impulse, especially when the handle is damaged. Therefore, it is best to do some research before buying a replacement. The first step is to know what type of upvc handles you have and what the differences are between them. The table below lists the most common handles to help you select the best one to fit your upvc window.

Most double-glazed windows today have epag handles. They are usually attached to the frame with two screws that are screwed into the frame from both sides, above and below.

They have a spindle bar at the back, which can be a variety of sizes. This will determine the way they operate (either left or right handed). This is the reason it's crucial to determine the handle size to ensure you're getting the right replacement.

The arm is fixed to the frame by two bolts, just like the Espag handle. However, the arm has a lower projection, so that it doesn't damage your blinds. This is a great option for those who want the handle to blend in with your blinds, and you have windows made of upvc.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge which sits on the window frame. This type of handle is typically found on older windows made of upvc and also on some wooden windows.

Tilt and turn handles are often found on casement windows and can be operated by turning the handle or pressing at the top of the window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. They're also a great option for those with limited mobility, and can enhance security and access to the home.

Tips and hints

Many people will have to replace their uPVC window handles at some point. When this happens it's best to know a few tips and tips that can help the job go as smoothly as it can.

Find out what kind of handle is at your home. Depending on the kind of handle and the locking mechanism, it might be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll need to replace them along with the handle.

Thankfully, the majority of uPVC handles are very similar and adhere to industry standard sizes, making replacing them a fairly simple process. First, take off the screws that cover the handles. They are typically pozidrive screws. After these screws are removed, you can take the handle apart.

If you've got the handle separated it is a good idea to make an inventory of how much of the spindle extends from the base of the handle. This will enable you to measure the spindle length for an alternative handle. Simply take note of the length the square peg sticks from the bottom of the handle.

This is especially important for inline uPVC window handles because they'll always be straight and can only open from left or right, and won't operate in the middle. It's a good idea if you're not certain of the kind of handle you have at your home, to borrow a handle and check out how it works.

You can also determine the handiness of a uPVC window by watching the way the handle turns when it is used. Handles that are hand-operated will turn clockwise or anti-clockwise. If you aren't sure then ask someone to open the window using the handle to see how it functions.

Measure the spindle

Selecting the right replacement handle for your windows could be difficult as there aren't all handles that are identical in size. It is crucial to accurately measure the spindle when fitting the new handle. This will ensure that the handle is suitable. There are numerous kinds of uPVC handles that function in various ways. It is crucial to know which type you have and the locking mechanism you are using.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are installed on uPVC windows with casement and can be locked using keys for extra security.

Cockspur handles have an "nose" which closes over a wedge-shaped striker block on the frame and they are typically found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. It is more difficult to replace these handles because they are not as popular as the handles made of espagnolette.

If you have an open tilt and turn uPVC window, you'll require a specific type of uPVC replacement handle that comes with an entirely different locking mechanism. The handle will tilt the window and also allow it to be rotated around to fully open it. You must ensure that the handle you pick has a spindle size at least 55mm, or it will not be able to get into the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, upvc replacement window handles you will have to be careful when removing it. You may need to open the window a bit larger than normal to ensure that you can access both screws that attach it to the frame. After you have installed your new uPVC handles and checked that they are in the proper position then tighten the screw covers and test to ensure the lock is working correctly.

Fit the new handle

Once you have the right replacement handle, it will simply be screwed into the appropriate position. This will require a screwdriver, but may be easier with an electric one. It is essential not to overtighten the screws before screwing them in. This could cause the handle or knob to warp.

The second step in installing the new handle is to install the spindle. This is the part that is inserted into the handle and controls the locking mechanism within the window sash replacement. It is crucial that the part fits correctly because this will allow the window to be opened and shut securely.

There are a myriad of different kinds of uPVC handles. There are various kinds of uPVC window handles.

Espagnolette Handles are handles inline which can be used to open tilt and uPVC Replacement Window Handles turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle but have a curvaceous design that is ideal for windows in hard-to-reach locations.

Tilt and turn handles - They are used to operate the opening mechanisms and closing mechanisms on tilt and move windows.

These are the most commonly used and the majority of uPVC windows have them in place. In the UK, they are commonly referred to as "Bay Windows".

It can be a hassle If your uPVC handle fails. There is no need to replace the entire uPVC window because of a broken window handle. There are a few simple steps you can take to repair or replace a damaged upvc window handle replacement handle.

You can repair your broken window handle fast by identifying the type and determining the spindle. When working with windows and tools it is crucial to consider safety first. But this is a fairly simple job. It could be the difference between a safe and secure home, or having a window that can be easily opened. If you have any concerns or want to talk to a specialist about replacing your window handle, call Bridgewater Glass. We have a team that is skilled and knowledgeable to help you with any problem.