Choosing uPVC Replacement Window Handles

Nearly all customers agree that these replacement double glazed window window handles made of upvc are simple to install and feel as good quality. But it's important to understand that the type of handle you choose is the one that's right for your window.

The height of the step is the most crucial factor. It is the distance between the handle and the frame, or base. Other considerations include lockable mechanisms and designs.

Replacement parts

You can purchase a range of replacement handles made of upvc. There are many designs and colors to pick from, so you're bound to find something that matches the windows you have. It's easy to purchase a product on impulse, especially when the handle is damaged. It is therefore advisable to check a few things before purchasing the replacement. The first thing you should consider is what kind of upvc handle do you have now and what the difference between kinds is. The table below lists the most commonly used handles so that you can select the best one to match your window.

Espag handles are the most common and are found on most modern double-glazed windows. They are typically attached to the frame using two screws that are screwed in from above and below.

They have a spindle bar on the back that can come in a variety of sizes. This will determine how they operate (either left or right handed). This is why it's essential to take a measurement of the handle you have in order to make sure you're ordering the correct replacement.

Typically fixed by two bolts, similar to the Espag handle, but they have a lower projection from the frame, which means that the arm won't poke through your blinds. This is a great choice if you want the handle to blend in with your blinds, and you have upvc windows.

Cockspur handles look similar to Espag handles, however they have a nose which closes over a wedge that rests on the frame of the window. This type of handle can be found on older wooden and upvc windows.

Tilt and turn handles are usually found on casement windows. They can be operated either by turning the handle or pushing on the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or step across the garden fence. They're also a great option for those with limited mobility and enhance security and access to the home.

Tips and tips and

A lot of people will need to replace their uPVC window handles at some moment. If this occurs, it's a good idea to be aware of a few tricks and tricks that will make the process go as smoothly as possible.

The first step is to determine what kind of handle you have at home. Depending on the type of handle and locking mechanism, it might be necessary for you to replace the handle and lock. If the roller cams or shoot bolts (espags) are stuck or are seizing up, you'll have to replace them, along with the handle.

Thankfully, most uPVC handles are similar and follow industry standard sizing, which makes replacing them a simple task. First, take off the screws on the handles. These are usually pozidrive screws. Once these are removed, you can then take the handle apart.

If you've got the handle broken, it's a good idea to make a note of how much of the spindle is protruding from the base of the handle. This will help you measure the length of the spindle to determine the replacement handle. To do this, simply take a measurement of the square peg sticking out from the top of the handle, and use it as a reference.

This is especially important for inline uPVC window handles as they are always straight and open either left or right, and they won't operate in the middle. It's a good idea in the event that you're not certain of the kind of handle you have at your home, to borrow a handle to see how it functions.

You can also determine the handedness of a uPVC window by watching the way the handle turns when it is in use. Handed handles can be rotated clockwise or counter-clockwise. If you're unsure, you can always ask someone else to open the window using the handle and figure out how it operates in this way.

Take a measurement of the spindle

It can be difficult to pick the correct replacement handle for your window because different handles do not have the same size. The spindle controls the locking mechanism inside the window and it is essential that when fitting the new handle it is measured to the length of the spindle accurately to ensure that it fits. There are many different types of uPVC handles that operate in different ways. It is essential to identify the type you have, and what locking system you have.

The spindle of the handle extends from the handle's rear and is connected to the lock gearbox within the window frame. When you turn the handle, it is then a way to turn the lock in the gearbox, allowing you to open the window. They are installed on uPVC windows with casement. They can be locked using keys to increase security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They have an "nose", which closes over a wedge-shaped striker block. They are also relatively easy to install and can be locked with keys. It is more difficult to replace these handles since they aren't as common as the handles made of espagnolette.

If you own a tilt-and-turn uPVC and you require a replacement handle with a different locking system. It can open the window, but also rotate it around to fully open it. It is essential to ensure that the handle you select has a spindle length at least 55mm, or it won't be able to get into the window frame.

You can follow the same method to remove and replace this type of uPVC handle, however you must be cautious when you remove the old one. You may need to open the window a little larger than usual to ensure that you can get to both screws fixing it to the frame. After you have installed your new uPVC handles and checked that they are in the proper position then tighten the screws and then test to ensure the lock is working properly.

Install the new handle

When you have the proper replacement handle it can be screwed into place. It will require a screwdriver and an electric one could be more convenient. It is important to not overtighten the screws when screwing them into. This could cause the handle or knob to become warped.

Inserting the spindle is the next important step to attach the new handle. This is the part that runs through the handle and is responsible for operating the locking mechanism within the window. It is crucial that it fits correctly as this will ensure the window can be shut and opened securely.

There are many different kinds of uPVC window handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt and turn windows.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curved design that is useful for windows in difficult-to-access locations.

Tilt and Turn Handles these are used on tilt and turn windows to operate the closing and opening mechanisms.

These are the most commonly used and the majority of uPVC windows have them in the first place. In the UK they are often referred to as "Bay Windows".

It can be very frustrating If your uPVC handle breaks. There is no need to replace the entire uPVC window because of a damaged window handle. There are several simple steps you can take to repair or uPVC Replacement Window Handles replace a damaged uPVC window handle.

Fixing your broken window handle quickly by identifying the type and measuring the spindle. When working with windows and tools, it is important to consider safety first. But this is a fairly simple task. It could make the difference between a secure and safe home or an insecure, easily opened window! If you have any questions or want to talk to a professional about replacing your window handle, call Bridgewater Glass. Our team is experienced and knowledgeable to help you with any issues.