UPVC Window Handle Replacement

It's simple to repair a damaged window handle with the right tools. It is important to know the type of handle and the spindle's length prior to purchasing a replacement upvc window handles.

Older uPVC windows have cockspur window handles which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. They can be right-handed or left-handed and must match when replaced.

What type of lock or handle do I have?

There are a variety of upvc window handles and locks, each with its own benefits and purposes. The type of handle you own will determine if your locking mechanism is efficient and also if it is simple to open windows. As time passes, and with regular use, the upvc handles on your windows can be damaged and worn out. This makes them less secure and effective. In some instances they might even disappear completely. If you find that your window handles have fallen off, it's essential to fix them as soon as possible. This will help prevent burglaries, and keep your house secure.

It's an easy task that anyone can complete. You will need some basic tools, but with right knowledge, it is an easy task that will only take a couple of minutes. To begin, you will need to determine the kind of lock and handle you have on your window and then to find the ideal replacement.

Inline Espagnolette Handles

They are usually found on the side of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also come with a spindle that runs through the middle of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles have one screw that secures the handle to the frame of the window and are not as secure as other kinds of window handles.

Handles that can tilt and turn

The tilt and turn handles differ from other upvc handles in that they can be turned for opening the window, and then lowered into the window to allow air circulation. They feature a 7mm spindle in the back and are available in right and left-handed versions.

When buying replacement upvc handles, it is important to measure the spindle's length as not all are the same size. Drop something in the middle of the hole to check the length. This is the maximum size of spindle that will fit into your windows.

What is the spindle?

uPVC window handles function similarly to doors, by turning the handle to operate a latch inside the frame. The window can then be opened and closed. The handles can become damaged, especially if frequently used or subjected to harsh conditions. This can leave you needing to replace your uPVC windows handles as they might not be able to operate the window properly for a long time.

There are several different types of uPVC handles that are available, comprising Espag, Cockspur and Spaded handle options. These handles are designed to fit into the uPVC frames in a variety of ways, and each type of handle utilizes a specific spindle to secure the mechanism to the window. This is why it is important to identify the type of handle is installed on your uPVC window so you can get the correct replacement.

The base section of the handle will tell you what type of uPVC it is. A snap-in cover should be over the screw that holds the base of the handle in place. Take it off and you should be able to see the second holding screw on the opposite side of the base portion of the handle. Once both screws have been removed and you are able to pull the handle from the uPVC.

After you have removed the uPVC handle, carefully remove it from the locking mechanism. Note the length of the spindle. You'll need buy a replacement of the same length as the handle that was originally used and the locking device.

The spindle wears out and cannot operate the locking mechanism. This can be caused by corrosion, damage from frequent use, or an unreliable locking mechanism. If this occurs, you will need to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Through time and UPVC Window Handle Replacement regular use, window handles can become damaged or broken, and if this happens, it is crucial to repair them as soon as you can to ensure the safety of your home. It is simple to replace a worn or damaged handle. The task can be accomplished in under one minute without the need of special tools.

To take off the handle, you first need to remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle can be pulled away. There will be a second screw that is located at the bottom of the handle's base and this can be removed as well. Once the two screws are removed, the handle will be removed from the base of the window.

After removing the handle and fixing holes, align the holes of the new handle with the holes already present in the window frame. There might be a small cap or sticker on the new handle, so take them off them if needed and then put the handle in its place. Once the handle is in place it is crucial to verify that it works by turning the handle and ensuring that the lock mechanism activates.

Espag handles have a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows have a blade with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross-member within the window.

After you have put in the new handle, slide the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle is fixed. When the handle is ready for use, you can open and close the window a few times to ensure it works correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult and the process is actually very simple. All you require is a screwdriver and a small amount of patience. First, make sure the old handle is unlocked. Remove any visible screws. You could also replace them with screw caps. After removing the handle you'll need to take note of the length of spindle that extends from the back. This is crucial since it will determine the kind of handle you'll need to buy.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. They have a spindle that is connected to the handle, and is responsible for an internal locking mechanism within the frame of the window. The handle releases the latch and allows the window to open. In regular use and time, espagnolette handles may become damaged.

Cadenza handles are a kind of uPVC handle that is typically used with tilt and turn windows. They feature a protruding blade that is operated by a multi-point locking mechanism inside the window. They are more secure than espagnolette handles because they are able to open from the inside. They can be replaced using the same procedure as espagnolette handles, however you will need to ensure that the new handle has an angled blade instead of flat ones.

Once you have determined the correct handle to purchase, you can simply align the new handle with the screw holes and then screw it into the appropriate position. Then, you should put the screw covers on and test the new handle. You can accomplish this by moving the handle back and forth from the locked position to the unlocked one several times. It might be worthwhile to speak with an expert to see how you can fix any problems. They can advise you on how to fix the issue in a timely and effective way.