Replacement Handles For UPVC Windows

UPVC window handles are available in different designs, but they all have the same locking mechanism. To replace a uPVC window handle, you must remove the top screw located at the base of the handle. This will reveal two additional screws.

Then, take a measurement of the spindle to ensure your new handle will fit. It's important to know the type of handle you have because there are a variety of sizes.

Inline Espagnolette Handles

Espagnolette handles are present on most modern double glazing window replacement glazed windows and operate multi-point locks which provide greater security. They function by using a 7mm square spindle at the back of the handle, which connects to a gearbox on the inside of the window frame, which turns multi-locks when they are turned. They are available in a variety of designs, including cockspur inline, key, and cockspur locking handles.

Our uPVC replacement handles for upvc windows handle kits are designed to make it easy to replace a damaged or faulty window handle with a espagnolette. These uPVC handle sets are packed with a variety of spindle lengths to suit the majority of applications. They come with all of the fixing screws required included. They are also available with key plugs that allow them to be converted from standard open/close to the egress and fire escape locking handles (if used in conjunction with the proper key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another option is our Yale Sparta 2 Inline Espag Handle which has been designed for minimal aesthetic intrusion with a reduced base height. It is part of the suited range of hardware. It is available in a range of finishes all of which conform to the requirements of BS EN 1670:2007 Grade 5 corrosion resistance. They have also been tested for endurance and are suitable for use in coastal areas and with acidic timbers. They are also compatible with cylinder immobiliser inserts that allow you to achieve key-locking status where this is needed.

Cockspur Handles

Cockspur handles are often found on older uPVC or aluminium doors and windows, are a simple latch-and-catch arrangement. The handle's nose is affixed to or placed into the catch, which is a wedge of plastic, which is attached to the window frame. Since the wedges come in various sizes, it is crucial that you know what step height to purchase before buying the new handle. Generally, uPVC frames have a handle step of 9mm and aluminum frames typically have a step height of 21mm.

The cockspur handle is lockable with a key, providing security to your home. The lock is put into the handle using a spindle, which fits into the handle via the hole for locking (also called a backset). The spindle is 7mm square in cross section and can be used to either open or close the window.

If you are replacing a cockspur handle it is important to make sure that the replacement has the same step height as the original. Usually, this is measured from the base of the spur on the handle to the underside of the nose of the handle. This measurement is also referred to as the backset or stack height, and it is vital that you have this information prior to purchasing a handle.

Cockspur handles are available as straight/universal, cranked, leftor right-handed versions. This permits the handles to be placed on the left or right opening window and allows the operator to have more ease of use.

Find out if your window requires a restrictor. This is designed to stop the handle from opening beyond a certain level. Generally, they are required for high-rise commercial or flats for safety reasons. However, the majority of domestic homes do not require these.

There are a number of different styles and colors of the cockspur handle, such as stainless steel with brushed finishes and white uPVC. The best cockspur handle for your windows will depend on your taste and style and how you want your window to work.

Tilt and Turn Handles

Tilt and turn handles are a very popular type of handle, that are typically found on double-glazed windows throughout the UK. Both timber and upvc ones have them. The handle is generally positioned at 90 degrees, but it can also be rotated in 180 degrees. This allows the window to be fully opened into the room and also drop down to allow for ventilation. The handle is locked in this position and requires an unlocking key whenever needed.

This type of handle is able to be changed, since it has only one large handle and not multiple smaller ones. This improves the appearance of the handle, and is more in line with contemporary minimalist design trends. Additionally they are also much easier to clean than casement windows, because the window opens up inwards and is cleanable on both sides.

They are also up to 8 times stronger than a conventional casement window. This makes them ideal for larger windows and doors. The frames also have a steel core that adds durability and strength.

The tilt-and turn mechanism is more secure than a casement, because the handle is locked in any position. This is especially crucial in areas where children could live, as it can prevent them from accidentally opening the window.

Tilt and turn windows are a common choice for many houses, since they can be utilized in various ways. They can be opened horizontally like a normal window, or dropped down to the style of a hopper. This is an excellent option for those who want to improve airflow and decrease noise in their home. They are also easy to clean and maintain because the glass is easily removed. They are available in a wide range of sizes and colors. They are ideal for any house and can be paired with both contemporary and traditional styles.

Crank Handles

Crank handles are easy to use and offer fantastic views of the outside, without obscuring the glass. They are typically used in casement windows which are hinged on the sides, or awning windows. They feature an mechanism similar to a window bar, and a linkage arm that supports the window sash. The window sash is opened or closed when you turn the handle clockwise. The crank window's mechanism unlike other handles is frequently subjected to much wear and tear. This can result in the handle's gears to break or Replacement Handles For UPVC Windows fall off the shaft of the operator. Monitoring the handle and operator mechanism regularly will ensure that they remain in good working order for the years to be.

A crank handle consists of a mechanical arm that's attached to a perpendicularly rotating shaft. The handle is operated manually by grabbing it and turning it in a circular direction, much like you would operate a pencil sharpener. In some applications the handle could be operated by a leg.

The base of the crank handle is hollow. This hole permits the handle to be connected to machinery and equipment. The handle's arm is equipped with an attaching bar that transforms the circular motion of the handle into reciprocating and rotary motions to control machines and equipment.

Boats are usually loaded onto trailers using crank handles, in addition to machines and equipment that can be adjusted. They are usually made of stainless steel which is resistant against corrosion in marine environments. This is why the majority of boat crank handles are coated with powder to protect them from damage and also to make them easier to clean.

If the crank handle on your window has stopped functioning or isn't opening the window, it might be time to replace it. Before doing so check for screws that attach to the trim inside the window frame's screen track. If there aren't any, try to loosen the cover using a strong putty knife by sliding it between the window jamb and the frame and pulling on it. If that doesn't work, you can take off the cover and get access to the crank mechanism by removing the screws inside the window frame.