How to Replace a UPVC Window Handle

If the window handle of your upvc is damaged, don't be concerned. Replacing the handle of upvc on a window is a simple job that can be completed in just a few simple steps.

Whether you have a cranked or in-line espagnolette style window handle, all of them have a square spindle bar that extends out from the back plate and is inserted into the locking mechanism.

Find out the type and the size of the lock and handle

Over time window handles or locks may get damaged and lose function. It is possible to fix this problem without replacing the entire uPVC unit. One of the first things you need to do is to determine the kind of handle and lock you have to determine the parts will be required for replacement.

You can determine the type of handle by looking at its base. A screw or pin is what holds the handle to its base. If the screw is missing, it could be an indication that the handle is separated from the base. If the handle has split internally and doesn't hold the spindle any longer, it may also be an indication that the handle must be replaced.

There are many different kinds of uPVC window handles, but the most common is the Espag handle. They are usually secured with two bolts and have a spindle that engages the lock mechanism inside the frame of the window. These handles are usually used on uPVC tilt and turn windows.

Another kind of uPVC window handle is the Cockspur handle. These are similar to the Espag handle, but they are a little further from the frame. These handles are typically used on older uPVC window frames.

Additionally, there are Venetian window handles that are similar to the Espag handle but they have an elongated base that allows them to be placed to the frame. These handles are a great choice for homeowners looking for a stylish handle that will blend with their uPVC frames. These handles are also available in a large selection of colors to fit any style.

Measure the spindle

It is crucial to know how the handle is fixed in place before ordering a replacement. This will tell you how tight or loose it is and whether it will fit properly into the window frame. This can be determined by identifying the handle type and determining the spindle's measurement. The spindle is the metal shaft that connects the handle to the lock in the window frame. It's available in a variety of sizes with the current industry standard being 8mm. Older handles might have a 9mm cross-section so it's crucial to take measurements of the old handle to ensure you get the correct size replacement.

There are many types of window handles. The most popular are the inline Espagnolette handles and the cockspur handles. These handles operate a locking mechanism in the window using shootbolt rods which secure the window when it is closed. They are held in place with pins or screws based on the type of handle you've got.

You can purchase Upvc handles replacement on the internet or in many DIY stores. They are available in a variety of finishes, and can be used to make new or replacement windows. To ensure security, they can be either key-locking or non-locking in fire-escape.

To take off the handle, simply open the window towards the door and replacement windows then remove all the screws holding it in place. Store the screws in a container to prevent damage. After the screws have been removed, gently pull out the handle and measure from the base to the top of the spindle. This will provide you with the necessary information to purchase the correct replacement. The handle's spindle is the metal shaft that connects it to the lock gearbox within the window frame.

Take off the handle from the old one.

The replacement of the handle of a uPVC window handle is an easy job that usually takes less than five minutes with the right tools. The first thing you need to do is determine the kind and size of the handle or lock. This will allow you to choose the right replacement. Then, you can measure the spindle to make sure that the handle is suitable. The old handle will need to be removed and replaced with the new.

Most uPVC handles come with inline Espagnolette handles. They have an internal spindle that slots into the locking mechanism on the window. They are usually easy to remove, but you may require force to remove them if they're stuck. The handle is typically secured by two screws which can be removed using a screwdriver. Depending on the kind of handle, you might be required to take out the pins that hold it in place.

After removing the screws you can remove the handle you were using previously. If the handle is unlocked and the top of the baseplate should be visible. This will reveal two more screws that can be removed. There's also an unimportant silver or color sticker that must be removed if it's in place.

Using the screws from the handle, you can screw the new handle into the appropriate position. Make sure that the handle is in the unlocked or open position, and then align the screw holes with the holes on the window. Once you've done this you can put on the caps on the screws and test the new handle to ensure that it works correctly. It's easy to change the uPVC, however you need to do it right.

Fit the new handle

If you've been able to successfully take the handle off the frame, now is the time to fit the new handle. Start by locating and removing the screws with your screwdriver. After the screws are removed, put them in a safe place before proceeding to the next step.

Then screw the spindle in by aligning it with the hole. Make sure that you align the holes in the handle with holes in the window frame and make use of a screw similar in length to those used previously, or it could result in the handle not being secure.

The uPVC Espag handle is equipped with a spindle that is 7mm square that rotates the lock mechanism on the window. This type of handle can be found in most modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, replacement windows curving nose that locks onto the outer frame or cross member of the transom bar. They are usually found on older uPVC windows.

It is essential to lock and unlock the window several times after the handle has been installed. If everything goes according to plan, your replacement handles for upvc windows uPVC window handle should now be properly attached and running smoothly. If you encounter any issues this guideline will help you identify the issue and fix it swiftly. If you are struggling with your uPVC handle or have any other problems with your glazed home improvement, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace window handles windows with a variety of handles and frames, making us an excellent choice for your double glazing needs.

Test the new handle

Over time, uPVC handles get damaged and worn out. It can make them less secure and effective and therefore it is essential to replace them as soon as you can. This is also a great thing to do when upgrading your windows. Switching your handle and locking mechanism will help to maintain the integrity of your new windows.

When it is to uPVC window handles, there are a number of different styles. Some are attached with screws or pins while others have blades which slide into the lock mechanism. Each type has its own method of replacement, and it's crucial to know what type you've got before you begin working on it.

Espag window handles are the most well-known type, and they're typically found on newer uPVC windows. They have a spindle that extends from the handle and into the gearbox of the lock and when you open the window, it activates the locking mechanism. They're also easy to remove however, you must be careful not to harm the mechanism or the handle when doing so.

Cockspur window handles are a popular choice for uPVC windows. They're secured by a spur that is snagged onto a wedge-shaped striker plate on the frame, and when you close or tilt the window, it activates the locking mechanism. This kind of handle can be more difficult to repair than other types, but it's an excellent choice for homes with a lot of windows.

Venetian handles are connected to the frame by two bolts and they have a low projection on the frame. This differs from the Espag handle. They're ideal if you want an flush handle that blends with your uPVC windows. They're an excellent choice for residential and commercial properties.