UPVC Window Handle Replacement

Replacing a broken window handle is a relatively easy task and with the right tools it can be accomplished quite quickly. It's important to know the type of handle you have as well as the size of its spindle before purchasing an alternative.

Older uPVC window handles have a spur which protrudes and locks on a wedge striker. They can be left or right-handed and must be to match when replacing.

What type of lock and handle do I have?

There are many different types of window handles made from upvc and locks, each having their distinct advantages and functions. The type of handle that you choose will determine whether or not the locking mechanism you have is effective and also if it is simple to open windows. Over time, and with regular use the upvc handles that are on your windows may become damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. If you notice that your upvc window handles have fallen off, it's crucial to fix them as soon as possible. This will stop potential burglaries and keep your home safe.

It's a task that almost anyone can do. You'll need a few basic tools, but with appropriate knowledge, it's an easy task that will only take a few minutes. You must be aware of the type of handle or lock that you have on your window. This will allow you to choose the right replacement.

Inline Espagnolette Handles

They are typically located on the side of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have a spindle running through the middle of the handle into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles have a single screw that secures the handle to the frame and aren't as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles are different from other handles made of upvc in that they can be turned for opening the window, and then lowered to the window to let air circulate. In general, they have a 7mm spindle on the side of the handle. They are available in left and right-handed versions.

It is important to measure the spindle size when buying replacement handles made of upvc. Not all of them are exactly the same size. Drop something into the middle of the hole to check the length. This is the longest spindle length that will fit in your window.

What is spindles?

uPVC window handles function in a similar manner to doors. By turning the handle, you can open a latch in the frame. The window can then be opened and closed. However, Window Handle Replacement sometimes the handles may become damaged, especially when they are used frequently or exposed to extreme weather conditions. This could mean that you have to replace your uPVC handles on windows since they may not operate the window in a proper manner anymore.

There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. This is why it is essential to know what kind of handle you have on your uPVC window to find the right replacement sash windows for it.

You can find out what kind of uPVC handle you have by taking a look at the base of your handle. A snap-in cover should be over the screw that holds the handle's base in place. Take it off and you should be able see the second screw located at the opposite end of the base of the handle. After both screws have been removed and you are able to take the handle out of the uPVC.

Once you have removed the uPVC window handle, you have to carefully remove the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You'll need to purchase a replacement with the same length as the handle that was originally used and locking device.

The main issue with most window handle problems with uPVC is that the spindle becomes worn out and can no longer work with the locking mechanism. This could be due to damage caused by constant use, a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you'll have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off the handle that was previously attached?

In the course of time and daily use, window handles may be damaged or destroyed, and if this happens it is essential to fix them as quickly as possible to ensure the security of your home. The good news is that replacing a worn or damaged handle is a simple job that can be accomplished in just over a minute and doesn't require any special tools.

The first step in removing the old handle is to take off the screw situated at the top of the handle base. Once the screw is removed, the handle will be pulled away from the base section. There is a second screw that is located at the bottom of the handle's base and this can be removed as well. When both screws are removed the handle can be removed completely from the base portion of the window.

Once the old handle has been removed, grab the new handle and align the fixing holes with the holes present in the window frame. There may be a little cap or sticker on the new handle, so take off them if needed and then put the handle in its place. It is essential to ensure that the handle is working after it is installed. Turn the handle over and make sure that the lock mechanism is activated.

Espag handles feature a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows come with an edge with cut-outs which slot into the lock mechanism, while Cockspur handles have a long nose that hooks over the frame's outer or transom bar cross-member within the window.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is securely fixed. The handle is now ready to use, so try opening and closing the window several times to check that it is working properly and securely.

How do I fit the new handle?

Changing your uPVC window handle isn't difficult, and the process is actually very simple. All you need is a screwdriver, and a small amount of patience. First, ensure that the old handle is unlocked. Remove any screws that are visible. You can also replace them using screw caps. After you have removed the handle, you'll need to record the length of spindle that extends from the back. This is crucial as it will determine the kind of handle that you will need to purchase.

Espagnolette handles on uPVC are the most well-known type of handle. The spindle passes through the handle to operate the locking mechanism in the frame of the window. When the handle is turned it releases the latch on the window, allowing it to open. When used regularly and time, handles for espagnolette may be damaged.

Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism inside the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced using the same method as you would do for handles made of espagnolette however, ensure that the new handle is angled, not flat.

Once you have selected the right handle, simply align the new handle with the existing screw holes before screwing it into place. Then, put the screws on and test the new handle. You can perform this by moving the handle between the locked position to the unlocked a few time. It may be worth contacting an expert to determine whether you can solve any issues. They can offer advice on how to solve the issue in a quick and effective way.