UPVC Window Handle Replacement

It's easy to replace a broken window handle with the proper tools. It's important to identify the kind of handle you have as well as the size of its spindle before purchasing an alternative.

Older uPVC window handles have a spur that protrudes and locks on a wedge striker. These can be either right or left-handed and have to be matched when replacing.

What type of lock or handle do I have

There are a variety of window locks and handles made from upvc each with its distinct advantages and functions. The type of handle that you own will determine if your locking mechanism is efficient and also if it is simple to open windows. Over time and through regular usage, the window handles made of upvc can become damaged or UPVC Window Handle Replacement worn out, making them less secure and efficient. In some cases they may even fall completely off. If you notice that your upvc window handles have been removed, it's crucial to repair them as quickly as you can. This will stop possible burglaries and will keep your home safe.

Luckily, replacing your window handles made of upvc is a fairly simple job that can be completed by everyone. With just a few tools and the right information, this is a simple process that shouldn't take longer than a couple of minutes. You must be aware of the type of handle or UPVC Window Handle Replacement lock that you have on your window. This will allow you to choose the right replacement windows.

Inline Espagnolette Handles

They are typically found on the sides of the window. They are flat and have an opening that engages the locking mechanism of the window frame. Inline upvc handles have spindles that run through the center of the handle and then into the frame of the window to activate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window by a single screw and are less secure than other varieties of window handle.

Tilt and Turn Handles

In contrast to other upvc handles, tilt and turn handles can be turned to open the window, and tilted inwards for ventilation. They feature a 7mm spindle in the back and are available in right-hand and left-hand versions.

It is important to measure the spindle size when buying new upvc handles. Not all of them are the exact same size. Drop something in the middle of the hole to measure the length. This is the maximum size of spindle that will fit into your windows.

What is the spindle?

uPVC window handles operate similar like doors, turning the handle to operate a latch inside the frame. The window is then opened and shut. However, in some cases, these handles can become damaged, especially if they are regularly used or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they're not operating properly.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type uses an entirely different spindle for locking the window mechanism. This is why it is important to identify the type of handle you have installed on your uPVC window so you can find the right replacement for it.

You can determine the type of uPVC handle you have by looking at the base section of your handle. There should be a "snap in cover over one screw that holds the handle base in place. After removing this you will be able to see the second screw that holds the base of the handle in position. After both screws are removed, you should be able take the handle out of the uPVC.

After you have removed the uPVC handle, carefully unscrew it from the locking mechanism. Be sure to note the length of the spindle as you'll need to ensure that you purchase an alternative that is the same length as your original handle and locking mechanism.

The spindle wears down and cannot operate the locking mechanism. This could be due to corrosion, damage caused by frequent use, or an unreliable locking mechanism. If this occurs, it is necessary to replace the window handle as well as the locking mechanism to restore full functionality to your uPVC windows.

How do I remove the handle from the previous one?

Window handles can become damaged or destroyed over time. It is important to fix them as quickly as possible to ensure your security. The good news is that replacing a damaged or worn handle is a simple job that can be accomplished in less than one minute and doesn't require any specialist tools.

The first step to remove the old handle is to take off the screw located at the top of the base of the handle. Once the screw has been removed, the handle will be removed. Another screw will be located at the bottom of the handle. This too can be removed. After the two screws are removed, the handle will be detached from the window's base.

After removing the old handle and fixing holes, align the holes of the new handle with the holes already present in the window frame. If there is a cap or sticker on the new handle, remove it if necessary and then screw the handle into the appropriate position. Once the handle is set, it is important to test whether it functions by turning the handle and ensuring that the lock mechanism activates.

Espag handles feature a spindle which protrudes out of the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows have blades with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the frame's outer or transom bar cross member in the window.

Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle is securely fixed. The handle is now ready for use by opening and closing the window a few times to check that it is working correctly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult, and the process is quite simple. You'll need a screwdriver and a bit of patience. First, make sure the old handle is unlocked. Remove any screws visible. You can also replace them using screw caps. After removing the handle, you need to make an note of the length of the spindle which protrudes from the back of the handle. This is vital as it will determine what type of handle you need to buy.

Espagnolette handles are the most popular type of handle used on uPVC windows. The spindle passes through the handle to control the locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. Over time and through regular use, espagnolette handles can be damaged or damaged which is why it is essential to locate an alternative.

Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism inside the window. They are usually more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced by the same method as espagnolette handles but you should make sure that the new handle has a curved blade as opposed to one that is flat.

Once you have determined the correct handle to purchase, you can simply place the new handle with the screw holes, and then screw it into the appropriate position. After that, you can put the screws on and test your new handle. You can do this by dragging the handle between the locked position to the unlocked one for a few times. If you encounter any issues, it may be beneficial to speak with a professional to determine if they can help resolve the problem. They will often be able to guide you on the best way to solve the issue in a speedy and effective manner.