Replacement Handles For UPVC Windows

UPVC window handles are available in various styles but all use the same locking mechanism. To replace a uPVC handle, first remove the top screw from the bottom of the window handle which will reveal two screws.

Next, measure the length of the spindle to ensure your new handle is a good replacement. It is important to identify the kind of handle you have as there are several sizes.

Inline Espagnolette Handles

Espagnolette handles are present on most modern double glazing window replacement glazed windows and feature multi-point locks which provide greater security. The handle is operated by a 7mm square spindle that connects to a geared box inside the frame of the window. This gearbox moves the multi-locks as the handle turns. They come in a variety of styles including cranked, inline key locking and cockspur handles. they can also be supplied as a set to replace the handle that has been broken or worn out.

Our uPVC replacement handle kits are designed to make it simple to replace a damaged or faulty window handle with a espagnolette. These uPVC handles come with all the necessary fixing screws as well as a range of spindle sizes suitable for most applications. These handles are also available with key-plugs that permit them to be switched from the standard open/closed handles to egress or fire escape non locking handles (if when used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Yale Sparta Inline Espag Handle is another option. It was designed to limit aesthetic intrusion and has a reduced height at the base. It is part of the suited hardware range and is available in a range of finishes that all conform to the requirements of BS EN1670:2007 Grade 5. They have been tested for their endurance and are suitable for use in coastal environments as well as with acidic timbers. They also work with cylinder immobiliser inserts in order to achieve key-locking status where this is needed.

Cockspur Handles

Cockspur handles, often found on older uPVC or aluminium windows and doors, are a simple latch-and-catch arrangement. The handle's nose is closed onto or into the catch which is a plastic wedge block mounted on the window frame. The wedges come in various sizes, so it's essential to know the step height you require prior to buying an alternative handle. In general windows made of uPVC tend to use a 21mm step size and aluminium frames usually have a 9mm handle step.

A cockspur handle is locked with the key, ensuring additional security for your home. The lock is installed into the handle with an appropriate spindle that fits in the hole in the handle (also known as a backset). The spindle measures 7mm square and can be used to open or close the window.

If you are replacing a handle for a cockspur, it is important to ensure that it has the same height of step as the original. It is usually measured from the bottom of the spur on the handle to the underside of the nose of the handle. This measurement is also known as the backset or stack height, and it is vital that you know this before ordering the handle.

Cockspur handles are available in straight/universal, cranked, leftor right-handed versions. This allows the handles to be installed on left or right opening windows and to allow the user easier access to the window.

Make sure your window has a restrictor. This is designed to prevent the handle from opening beyond a certain level. Generally, they are required for high-rise commercial or flats for safety reasons. The majority of domestic homes don't need these.

There are many different styles and colours of cockspur handle, including brushed stainless steel and Replacement Handles For UPVC Windows white uPVC. Choosing the best one for your windows will be based on your personal preferences and style, as well as how you would like the window to perform.

Handles that tilt and turn

The UK is home to a wide range of double-glazed windows with tilt and turn handles. They can be found on both upvc and timber windows. The handle is generally positioned at 90 degrees, however it can also be rotated in 180 degrees. This allows the window be opened to the room completely and to drop down to let air circulate. The handle is locked into this position and requires an unlocking key when needed.

This kind of handle can be easily replaced, as it has only one large handle and not multiple smaller ones. This makes it less obvious the handle, and is more in line with contemporary minimalist design trends. Additionally they are much simpler to clean than casement windows, because the window opens up inwards and can be cleaned on both sides.

They are also 4 to 8 times stronger than a casement window. This makes them ideal for larger windows and doors. The frames are also made of steel, which adds strength and durability.

The tilt-and-turn mechanism is also more secure than a casement, because the handle is locked in any position. This is particularly crucial in areas where children are present because it stops them from accidentally opening a window.

Tilt and turn windows are a popular choice for many homes due to their ability to be utilized in various ways. They can be opened horizontally like windows that are regular, lowered down in the hopper style to provide ventilation, or tilted backwards to allow for cleaning and maintenance. This is a great choice for those looking to increase the airflow in their home and can also help with noise reduction. They are also easy to clean and maintain, because the glass is easily removed. They are available in a wide range of sizes and colours. They are a great addition to any house and can be paired with both modern and traditional styles.

Crank Handles

Crank handles require little effort to open and permit a stunning view of the outdoors without obstructing the glass. These handles are commonly used on casement windows hinged on the side or awning windows. They have a mechanism similar to a window bar and linkage arm that supports the window sash, which opens or closes by turning the handle in a clockwise direction. Contrary to other kinds of handles that are geared towards windows, a crank window's mechanism and handle are usually subject to significant wear and tear, which can cause the gears strip and the handle to cease working or fall off of the operator shaft. Monitoring the handle and the operator mechanism regularly will ensure that they are in good condition for Replacement Handles For UPVC Windows many years to be.

A crank handle is composed of a mechanical shaft that rotates perpendicularly and is connected to an arm. The arm is operated by gripping it and turning it in a circular manner similar to how you use a pencil sharpener. In certain instances the handle could be leg-operated.

The base of the crank handle is hollow. It's this hollow that allows it to be connected to equipment and machinery. The handle's arm features an attaching bar that converts the circular motion from the handle into rotary and reciprocating motions to operate machines and equipment.

Boats are usually loaded onto trailers using crank handles, in addition to the adjusting equipment and machinery. They are typically made of stainless steel, which is resistant against corrosion in marine environments. This is why the majority of boat crank handles are coated with powder to protect them from damage and to make them easier to clean.

Replace the crank handle if it stops working or does not open the window. Look for the trim mounting screws in the track of the window frame. If there aren't any to be found, you can use a rigid putty blade to loosen the cover by sliding it between window jambs and the frame. If that doesn't work, you can remove it and get access to the crank by removing screws from the frame of the window.