Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like aluminum or timber.

It is essential to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very dangerous and double potentially fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance, you will need to find some plastic spacers to help the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to fix the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act when you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window that is sliding. To accomplish this, you'll need to open the window to access the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and check for fitting. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. The first step is to close the window and perform a test to ensure that it fits. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do are not just a cause for destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the problem is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window replacement near me repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is an easy procedure, but it is simpler when you have a person to assist in holding the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge, this indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to improper installation in the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also prevent corrosion and decrease the chance of sticking. This should be done at least every year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different causes. The hinges may also become unbalanced due to wear, causing an opening where the sash meets frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. In addition, the interlock could be disaligned. This happens on the hinge's side and may need to be cleaned. In some cases it is possible to replace them.

The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through the gaps. Replacement of these with high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another, and most effective ways to reduce draughts is by using a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be put on the top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc window repairs will continue to provide excellent insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it may be cheaper to replace them rather than repair them. If you have any problems with your upvc window it is recommended to speak with a professional as soon as you can.