Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

It is essential to clean and UPVC Window Repairs oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and may even be fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance you'll need to find some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not on the floor and could be trampled.

After the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you might think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, with time, they can suffer from a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it is important to act swiftly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll need to open the window to get to the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you are happy with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles could also loosen. The majority of the time it is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to repair a loose uPVC window handle yourself. The first step is to close the window and UPVC Window Repairs perform a test fit. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking that was used up might need to be removed before a new layer is applied. It is essential to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the problem is with the seal rather than the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It is essentially a simple process, but it's easier if you have someone to assist in holding the frame up.

Verify that the uPVC hinges are open and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window a certain way or by improper installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to offer assistance.

It is also important to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window replacement open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. First, the hinges because of wear and tear, could become misaligned. This will cause a gap to form where the sash meets the frame. If they are beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it's possible to just give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are usually fabric tubes filled with some kind of filler. They can be positioned on the windowsill on top. They will keep your home warm by blocking cold air.

With a little maintenance and repairs your windows made of upvc repairs near me will continue to provide an excellent level of security and insulation for your home. However, it is important to recognise that windows last for a certain period of time and eventually, they will reach a point where it is more efficient to replace them than fix them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional immediately.