Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the distance between the door and the window is large, you might prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sliding. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.

If you can't reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. The majority of the time it is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close your window and do a test to ensure that it fits. The corners of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it's important to take action. Leaks of water from windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the old caulking might need to be removed before a new layer of caulk is applied. When it comes to uPVC repair, upvc Window repair near me you should avoid over-caulking. This will make your window harder to clean and lower its energy efficiency.

Check that any drainage holes do not have debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed glass it is more likely that the issue is more related to the seal, not the frame. This can be easily fixed by a upvc window repairs near me window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with a breeze. They can be replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. Changing a window hinge is an easy process but it can be easier to do when you have a person to help you hold the frame in place.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. The hinges may also become misaligned due to wear, causing a gap between the frame and sash. They can be repaired by giving them thorough clean, however if they are beyond repair it might be necessary to have them aligned or replaced. The interlock may also become disaligned. This is located on the hinge's side and might require to be cleaned. In some cases it is possible to replace the hinges.

The next common reason for draughts is window seals, these are prone to wear or damaged over time, and let air escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the upvc windows with low-emissivity glasses. This will help control indoor Upvc Window repair Near me temperatures, and reduce the possibility of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to simply replace them instead of fixing them. If you have any problems with your upvc window repair near me window it is recommended to speak with an expert immediately.