UPVC Window Handle Replacement

It's easy to repair a damaged window handle with the right tools. It is essential to know the type of handle you have as well as the size of its spindle before purchasing a replacement.

Older uPVC windows feature handles with cockspurs, which have an extension spur that can lock over a cockspur wedge striker plate. They can be right or left-handed and have to be replaced with the same handle.

What type of lock and handle do I have?

There are a variety of upvc window locks and handles each with their distinct advantages and functions. The type of handle you have will determine how easy it is to open your windows and whether or not the locking mechanism functions as intended. With time and regular use, the upvc handles on your windows can be damaged and worn out. This makes them less secure and effective. In some cases they may even fall off completely. If you notice that your upvc window handles have been removed, it's essential to repair them as quickly as you can. This will help prevent burglaries and ensure that your home is secure.

It's a simple job that almost anyone can do. You'll need some basic tools, but with the appropriate knowledge, it's simple and should only take a few minutes. You must know the kind of handle or lock that you have on your window. This will help you select the appropriate replacement.

Inline Espagnolette Handles

They are typically found on the sides of the window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle into the window frame to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and Window Handle Replacement have a distinctive, hook-shaped design. Cockspur handles are held to the frame of the window by one screw, and are less secure than other varieties of window handle.

Tilt and Turn Handles

In contrast to other handles made of upvc, tilt and turn handles can be turned to open the windows and turned inwards to allow to allow ventilation. They feature a 7mm spindle in the back and are available in left and right-handed versions.

When you are purchasing Replacement Sash Windows handles for upvc, it is important to check the spindle length as not all are the same size. To determine the length of your upvc handle, simply drop something into the middle of the hole and measure how far it extends before it reaches an obstruction. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles function in a similar manner as doors. By turning the handle, you are able to open a latch in the frame. This unlocks the window to allow it to be closed and opened. But, at times, these handles can become damaged, particularly when they are used frequently or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it properly.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. They are designed to fit into the uPVC frames in different ways. Each handle utilizes a specific spindle to lock the mechanism fitted into the window. This is why it is essential to identify the type of handle you have on your uPVC window to find the right replacement for it.

The base of the handle will tell you what type of uPVC it is. There should be a "snap-in cover over one screw which holds the handle base in the correct position. Take it off and you should be able see the second screw at the opposite end of the base of the handle. After both screws are removed you should be capable of pulling the handle away from the uPVC window.

Once you have removed your uPVC window handle, you will need to carefully remove the spindle you have removed from the locking mechanism. Make note of the length of the spindle since you'll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.

The main issue with most window handles made of uPVC is that the spindle becomes worn out and can no longer operate the locking mechanism. This can be caused by corrosion, damage from constant use or a loosening locking mechanism. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove the handle from the previous one?

Window handles can become damaged or even broken over the course of time. It is important to repair them as quickly as you can to ensure your safety. It is simple to replace a damaged or worn handle. The task can be completed in less than a minute without the need of special tools.

To remove the old handle, you first need to remove the screw at the base of the handle. After the screw is removed, the handle will be removed. A second screw is located at the base of the handle. This can also be removed. After these two screws have been removed, the handle will be detached from the base of the window.

After removing the old handle and align the fixing holes of the new handle with the existing holes in the window frame. If there is a sticker or cap on the new handle remove it if required and screw the handle in place. Once the handle is in place it is crucial to verify whether it functions by turning the handle and making sure that the lock mechanism is activated.

Espag handles have a spindle that protrudes from the handle and slot into a multipoint locking mechanism inside the frame of the window. Cadenza windows come with blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the outer frame or transom bar cross-member within the window.

Once you have the new handle in place, you can insert the spindle into the lock in the window and then tighten it down. Once the handle is firmly fixated and secured, replace the snap-in cover and the screw cap (if appropriate). The handle is now ready to use by opening and closing the window a few times to check that it is working properly and securely.

How do I put in the new handle?

It's not difficult to change the handle on your Upvc windows. The process is simple. You only need an screwdriver and a bit of patience. First, ensure that the handle is not locked. Remove any screws that are visible. You could also replace them with screw caps. After removing the handle, you'll need to take note of the length of the spindle that extends from the back. This is important because it will determine the kind of handle to purchase.

Espagnolette handles are the most popular type of handle used on uPVC windows. The spindle is inserted into the handle to operate the locking mechanism in the frame of the window. The handle opens the latch, allowing the window to open. With time and regular use, espagnolette handles may become damaged or impaired and it is necessary to locate a replacement.

Cadenza handles are a form of uPVC handle that is commonly used in tilt and turn windows. They feature an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are generally more secure than espagnolette handles since they can only be opened from the inside. You can replace them with the same method as you would with espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have decided on the right handle to purchase then you can place the new handle with the existing screw holes and then screw it in the appropriate position. Then, put the screw covers on and test the new handle. This is done by moving the handle from the locked position to the unlocked and then back to the locked position a few times. If you experience any issues, it could be beneficial to speak with a professional to determine if they can assist you in solving the issue. They can offer advice on how to fix the issue in a timely and effective manner.