Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. However If you have double glazed window repairs-pane windows that are secured by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case, Window Repair you will need to locate some plastic spacers that will assist the new pane to fit perfectly into the window frame.

Wearing eye protection and thick gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the Window Repair panes so that any shards fall onto the fabric and not onto the floor and could be trampled.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional is able to come out and repair the window. This will also act as a barrier, preventing any intruders from gaining entry into your home. If the gap is large, you might want to consider using a security door that has an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges can aid in fixing a window which is sagging. You'll first need to open the windows to access the frame. With a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in position.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need close the window and perform an experiment fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, it is important that you take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on the severity of the issue is, the old caulking may need to be removed. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window more difficult to clean and reduce its energy efficiency.

Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with ease it could be the hinges that are at the fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like any mechanical component hinges will wear out over time. It's easy to change a window hinge however it is simpler if you have someone to help you hold the frame.

Verify that the uPVC hinges open and close in the proper direction. You can do this by looking for the arrows on each hinge. This indicates which way the window should open.

The issue could be caused due to opening the window in the wrong way or a faulty installation in the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be more than happy to give you suggestions.

It is also crucial to lubricate the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window to open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can be misaligned. Again, it's possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air escape. Installing high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric filled with some kind of filler. They can be positioned on the windowsill on top. They can help block out cold air and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it is best to seek professional assistance as soon as possible.